Skip to main content

Improving Performance

November 2026

The methane reduction requirements implemented in 2019 were a significant change to how industry manages and reports methane. Better industry understanding of compliance with the requirements is critical to successfully reducing methane emissions. To continuously improve understanding and ensure compliance, we are carrying out the following activities:

We have invested in methane detection equipment to better our understanding of emissions, detect potential noncompliances, and help drive better industry performance. The detection equipment we use includes the following:

  • Optical gas imaging (OGI) cameras 
  • Truck-mounted methane sensors
  • Vent gas metering equipment

Learn more about compliance assurance at the AER.

Remote Sensing Pilots

In 2019, we kicked off a remote sensing pilot using technologies such as satellite-, airplane-, and truck-mounted methane sensors as emissions compliance tools. The pilot objective was to determine if there are technologies available that could serve as regional surveillance tools for emissions compliance.

Truck-Based Campaign

The AER started piloting truck-mounted methane sensing technologies in late 2024. The table below highlights detections identified by remote sensing truck unit in 2025. This technology was added to the methane inspector’s vehicle and was used as a tool in addition to the OGI surveys completed.

Measurement sourceNumber of detectionsAverage volume detected (m3/d)
Defined vent gas (DVG)11263.5
Fugitive & surface casing vent flow (SCVF)3319.9
Unlit flare stack0N/A
Methane slip44610.9
Pneumatics324.0

The truck-mounted methane sensor pilot is continuing in 2026, and results will inform its use in future remote sensing campaigns. 

Aerial-Based Campaign

The airplane technology has been an effective tool in identifying methane emissions because it not only detects emissions but also quantifies them and takes relevant site photos and compares multiple sites in a short timeframe. The following table shows the results of the 2019 to 2023 surveillance campaigns.

 20192020202120222023
Methane Sensor PlatformActive (Lidar)Passive (Spectrometer)Active (Lidar)Active (Lidar)Active (Lidar)
Minimum Detection Threshold (MDT)2.1−2.7 kg/hr11.0 kg/hr2.1−2.7 kg/hr2.1−2.7 kg/hr1.8 kg/hr
(72−92 m3/day)(375 m3/day)(72−92 m3/day)(72−92 m3/day)(64 m3/day)
Number of Facilities1194292710121200388
Sites over 500 m3/day2756647324
Number of sites with Detections over MDT4869271387103
Detections per site (%)40.70.326.832.326.6
Average Emissions per Facility

476

 

5

 

160

 

128

 

102

 

Average Emissions per Facility with Detection (m3/day)

 1168

 

1760

 

597

 

397

 

385

 

Volume Identified (m3/day)567 82915 836161 725153 55739 676

The map below shows the locations of the remote sensing pilots conducted by the AER from 2019 to 2023. 

Map

Lessons Learned

The aerial-based campaign concluded in 2023 after surveying facilities across Alberta between 2019 and 2023. The campaign demonstrated that airplane-mounted technology can screen large numbers of facilities in a short timeframe and help us focus follow-up on higher-risk sites. We will apply these lessons, including the importance of inspector validation and robust performance testing, as we continue to evaluate other remote sensing technologies, such as the truck-mounted methane sensor pilot, for use in our compliance program.